EQ & Compression
Your Personal Audio Engineer
Describe the problem: "muddy low mids", "too much presence", "tighten the bass". Jamu picks the right device, sets every parameter, loads it, and fixes it.
Download For Windows
Requires Windows 10/11 (64-bit)
Download For Mac
Requires MacOS +11 with Apple Silicon
Jamu · Ableton Session
"The vocal sounds muddy in the mids and a bit harsh. Clean it up. Then add some compression. Nothing too aggressive, just glue it together."
J
Jamu
🎚
✓ Loaded
🗜
Glue Compressor → Ratio 2:1 / Slow attack / Auto release / -10dB
✓ Loaded
Both loaded. Anything else to fix?
1 prompt
describe the sound, get the device loaded and configured
50+ EQ presets
plus full parameter control from natural language
Easy to use
Jamu translates your description into parameters
The problem
You know what the track needs
Getting there is the hard part
🧠
You have to know the tools first
Which device does what, which preset to start from, which parameter controls the thing you're hearing. That knowledge gap slows you down mid-session.
🎛
Presets don't describe sound
🔄
Creative intent needs a technical translation
How it works
1
Describe the problem or sound
Tell Jamu what you're hearing, the character you want, the problem you're fixing, or a combination. You don't need to know which device handles it or what values to use. Natural language works. Vague works.
Jamu · ABLETON session
"The vocal has too much low-mid buildup. Clean it up and add a bit of air at the top."
2
Jamu picks the device and sets parameters
Jamu reads the session, picks the right device, finds a starting point if there's a useful preset, and configures every parameter in one pass. Nothing to drag from the browser, nothing to click through individually.
Jamu · READING session
J
Jamu
◎
Session read. Vocal Bus: no EQ present. Dry chain.
◈
Loading EQ Eight — HP 80Hz / Cut 2.5dB 360Hz (wide) / Shelf +1.5dB 10kHz
Loaded to Vocal Bus. Add compression or adjust any band?
3
Build the full chain or apply across tracks
Add compression, set up sidechain routing, or apply the same processing across multiple tracks at once. Jamu holds the full session in context, each step knows what's already there and what still needs work.
Jamu · SWAPPING PRESET
"High-pass the low end on Tracks 4, 5, 6, and 7. Same settings."
J
Jamu
◈
EQ Eight loaded on Track 4. HP 200Hz applied
◈
EQ Eight loaded on Track 5. HP 200Hz applied
◈
EQ Eight loaded on Track 6. HP 200Hz applied
◈
EQ Eight loaded on Track 7. HP 200Hz applied
Done. 4 tracks processed in one pass.
How Jamu works
Describe the sound.
Jamu sets the parameters.
💬
You don't need to know the values
Tell Jamu what you want to hear. "Take out the muddiness" or "add some air" maps to specific EQ settings. You describe the problem. Jamu handles the translation into Hz, dB, and Q.
⚡
Device loaded and configured in one step
Jamu doesn't just add the device, it configures it at the same time. EQ with the bands set, compressor with the ratio and threshold dialed. One description. Nothing to click through.
🔗
Sidechain without the routing steps
"Make the bass duck under the kick, tight pump, not too extreme." Jamu loads the compressor, sets the parameters, and wires up the sidechain routing. One sentence handles all of it.
📋
Apply it across the whole session
Clean up the low end on five tracks at once. Gain stage a full mix. Jamu handles batch operations. every track in one command, no device panel opened per track.
Questions
Common questions
Do I need to know EQ or compression settings to use Jamu?
Can Jamu set up sidechain compression in Ableton?
Can Jamu apply EQ or compression to multiple tracks at once?